For the Health
of your Family
Purever Silvinox tanks have Four Layers of insulation for saving energy, ensuring hygiene and weather resistance.
Inner tank made of 316Ti highest grade of steel used in the biomedical implants, which is 100% clean, non-corrosive, non-porous and highly resistant to chemical attack.
The original development of this material is based on 316. Implant grade stainless steel have specific requirement "Titanium" for Implant concern Bio-compatibility.
Titanium oxide is hygroscopic and will form on the surface of titanium alloys if sufficient levels of oxygen are present in the media surrounding. Titanium oxide exhibits good photo catalytic properties, hence is used in antiseptic and antibacterial compositions which Degrading organic contaminants and germs.
Silvinox tanks are pressurized the thickness of stainless steel is 1.5 mm which are on average around 80% thicker than other manufacturers, of the same general capacities and dimensions.
Resistance to sensitization in 316Ti with titanium additions to stabilize the structure against chromium carbide precipitation, which is the source of sensitization.
When considering the clean ability of Stainless steel 316Ti compared with other material such as plastic, aluminum and ceramic, St. steel is far best. After one Hot water wash the Stainless steel 316Ti asct as natural wood which virtually free from Bacteria retention.
Early identification of market requirements making highest quality due to uncompromising use of high grade stainless steel. In-house engineering, materials research and development team, designing high degree of safety due to hermetic encapsulation and gapless airtight storage.
The ultra smooth non- corrugated Interior surface which effectively prevent lime scale deposits. The all-welded construction is completely watertight ensuring constant excellent water quality and reliable long-lasting water storage.
Enhance natural water flavor and preserves natural nutrients even with coming into contact with the natural salts.
Throughout the manufacturing process all the tanks and vessels are subject to stringent quality checks. An overall test forms part of the FAT (Factory Acceptance Tests) procedures and the relevant documentation forms part of the FAT protocols.
Non-pressurized or corrugated stainless steel tanks require frequent maintenance and can be difficult to repair if they become damaged. But thicker gauge tanks require very less maintenance and can be repair after 10 years.
Silvinox Stainless steel tanks can cost little higher then normal unpressurized steel tanks, however this is marginal in comparison to the difference in lifespan, with stainless being the cheapest over the long term.
Relatively high resistance against rough materials. They will last longer than an ordinary tank. Not affected by any vulnerability. No risk involved such as cracking, freezing, and rusting.