Purever

Purever Max Soft Auto

Water enters the water softener and flows through the resin tank.
The calcium and magnesium carbonates that create hard water are retained within the resin beads, during the ion exchange process.
Softened water then flows into the premise.
Once the resin tank has depleted its capacity for the amount of calcium and magnesium carbonates it can hold, it will need to regenerate, clean and disinfect itself to replenish its capacity. A concentrated salt water solution (brine) will be flushed through the tank to conduct this regeneration. The Purever Softener will conduct this process Automatically, at pre-set hours that is necessary to continue providing softened water.
During the regeneration, all waste water will be flushed down the connected waste.
Post regeneration of the Purever Softener will be ready to go again, and continue providing softened water to the premise

remove suspended solids like silt sand, dirt and other types of sediment

Description	MODEL 1	MODEL 2	MODEL 3	MODEL 4
Vessel Size	10 × 54	13 × 54	14 × 65	18 × 65
Resin Volume	1.75 Cu. feet	3.0 Cu. feet	4.6 Cu. feet	7.2 Cu. feet
Regeneration Time (200 Hardness)	12000 litre	22000 litre	35000 litre	50000 litre
Salt use	6-7 Kg	12 Kg	18 Kg	28 Kg
Recharge Time Automatically * Recharge * Backwash * Rinse	60 Minutes	60 Minutes	60 Minutes	60 Minutes
Litre per hour capacity	1500 LPH	2500 LPH	3500 LPH	3500 LPH